Adhesive non woven fabric manufacturers

Buyers should focus on GSM (Grams per Square Meter), which typically ranges from 15gsm to 150gsm depending on the application. For the adhesive component, identify the type of coating: Hot-melt, Acrylic, or Solvent-based. Ensure the peel strength meets your specific requirements (e.g., >5N/25mm for industrial use) and verify the substrate material, such as PP (Polypropylene), PET (Polyester), or Rayon, to ensure compatibility with the end-use environment.

For medical or hygiene applications, ensure the supplier holds ISO 13485 or CE certification. If the fabric is used in garments, OEKO-TEX® Standard 100 is mandatory to guarantee the absence of harmful substances. For general industrial use, REACH and RoHS compliance are critical for entering the EU market, while FDA 21 CFR may be required for food-contact or medical-grade adhesives in the US.

Request Initial Tack, Holding Power, and Peel Adhesion test reports. It is vital to test the temperature resistance (typically ranging from -20°C to 80°C) and aging stability to ensure the adhesive does not dry out or lose grip during long-term storage or transit. For breathable applications, verify the air permeability (measured in L/m²/s) to ensure the adhesive layer does not completely seal the fabric pores.

This product is highly versatile, used in Medical Supplies (surgical tapes, wound dressings), Automotive Interiors (headliners, sound insulation), Garment Interlinings (collars, cuffs), and Construction (waterproof membranes). Understanding the specific scenario allows you to choose between permanent bonding or removable/repositionable adhesives.

The biggest risk is temperature and humidity fluctuations during sea freight. High heat in containers can cause adhesive transfer or 'bleeding', where the glue seeps through the fabric layers, rendering the roll unusable. Always insist on moisture-proof packaging (PE film wrapping) and, for high-sensitivity adhesives, consider temperature-controlled logistics or shipping during cooler seasons.

Utilize the Secured Trading Service on Made-in-China.com to protect your payment until delivery is confirmed. When negotiating, clearly define the Defective Rate threshold (usually <2%) and include a clause for third-party pre-shipment inspections (such as SGS or Intertek). This ensures the product matches the approved sample before the final balance is paid.

Non-woven fabric is a 'light cargo' (high volume, low weight). To optimize costs, negotiate for vacuum packaging to reduce volume, or use custom roll widths that maximize container space utilization. Compare FOB (Free On Board) terms to maintain control over your freight forwarder, which often results in better demurrage and detention terms compared to CIF.

Check if the supplier is an Audited Supplier on Made-in-China.com, which indicates their business license and production capabilities have been verified. Request a factory video tour focusing on the coating line and slitting machines. A reliable supplier should be able to provide batch-specific COA (Certificate of Analysis) and have a clear shelf-life guarantee (typically 12–24 months) for the adhesive properties.