Ammonia heat exchanger manufacturers

Due to the corrosive nature of ammonia, especially when moisture is present, carbon steel, stainless steel (304 or 316L), and specific aluminum alloys are the primary materials used. You must strictly avoid copper and copper alloys, as ammonia causes rapid stress corrosion cracking in these materials. For high-pressure applications, ensure the supplier uses seamless tubes rather than welded ones to minimize leak risks.

Ammonia is a hazardous refrigerant; therefore, equipment must adhere to rigorous pressure vessel codes. Ensure the manufacturer is certified under ASME Section VIII (U-Stamp) for the US market, PED 2014/68/EU (CE marking) for Europe, or GB150 for China. Additionally, verify compliance with IIAR (International Institute of Ammonia Refrigeration) standards for system design and safety.

Semi-welded Plate Heat Exchangers are preferred for their low ammonia charge and high thermal efficiency, which enhances safety by reducing the volume of hazardous gas. Shell-and-Tube designs are more robust for high-fouling applications and are easier to clean mechanically. Buyers should choose based on their system capacity, space constraints, and maintenance capabilities.

Prioritize units featuring double-wall plates or laser-welded cassettes to prevent cross-contamination between the ammonia and the secondary fluid. Ensure the unit includes high-quality gaskets (such as EPDM or Chloroprene) specifically rated for ammonia service. Request Non-Destructive Testing (NDT) reports, such as Radiographic Testing (RT) or Helium Leak Tests, to validate weld integrity.

Always engage a third-party inspection agency (such as SGS, TUV, or BV) to conduct an on-site audit during the production phase and a final inspection before sealing the container. Verify the Material Test Reports (MTRs) for all pressure-retaining components to ensure they match the specified grades.

Ammonia heat exchangers are heavy and sensitive. Use FOB or CIF Incoterms to clearly define risk transfer. Ensure the supplier uses vacuum packaging with desiccant to prevent surface oxidation during sea transit and employs heavy-duty wooden crates with internal bracing to prevent shifting. For large shell-and-tube units, confirm the availability of lifting lugs and proper center-of-gravity markings.

For industrial machinery, a standard 30% deposit / 70% balance against BL copy is common, but for high-value orders, consider using a Letter of Credit (L/C) or Escrow services provided by Made-in-China.com to ensure funds are only released upon verification of shipping documents and inspection certificates.

Beyond the standard Invoice and Packing List, you will need the Manufacturer’s Data Report (MDR), Pressure Test Certificates, and Certificate of Origin. Ensure the HS Code (typically 8419.50) is correctly declared to avoid delays or incorrect tariff applications in the destination country.