Wall-mounted urinal price

Prioritize Vitreous China (Ceramic) over standard porcelain for superior durability and low water absorption (typically <0.5%). Ensure the supplier uses Self-Cleaning Nano-Glaze technology, which creates an ultra-smooth surface that prevents bacteria buildup and staining. Check for 360-degree full glazing in the trap-way to ensure smooth waste discharge and prevent clogging.

Look for High-Efficiency Urinals (HEU) that consume 0.5 GPF (1.9 LPF) or less to meet international green building standards like LEED or WaterSense. For commercial high-traffic areas, Sensor-Activated Infrared Flush Valves are essential for hygiene. Ensure the flush valve is compatible with local water pressure (standard 0.05MPa to 0.8MPa) to avoid splashing or weak flushing.

Verify the In-wall Carrier System compatibility; wall-mounted units require a robust concealed mounting bracket capable of supporting at least 200kg. Confirm the Outlet Type (P-trap for back discharge or S-trap for bottom discharge) matches your project's plumbing layout. Choosing Top-Spud vs. Back-Spud models significantly impacts the aesthetic and the type of flush valve required.

For the North American market, products must meet ASME A112.19.2/CSA B45.1 standards and ADA (Americans with Disabilities Act) height requirements for accessibility. For European markets, look for the CE Mark and EN 13407 compliance. Always request CUPC or WaterMark certifications if you are exporting to the US or Australia to ensure legal installation.

Sanitary ceramics are fragile. Insist on 5-layer corrugated export cartons with molded foam (EPS/EPE) protection. For bulk LCL (Less than Container Load) shipments, wooden palletizing or crate reinforcement is mandatory to prevent crushing. Always include a 1-2% breakage allowance or spare parts clause in your contract.

Focus on Volume-Based Tiered Pricing. Manufacturers on Made-in-China.com often offer significant discounts for Full Container Loads (FCL) because it reduces handling risks and logistics costs. Negotiate based on un-branded (white label) vs. OEM branding, as custom logo molding can increase the unit price by 5-10% for small batches.

Utilize Secured Payment services provided by Made-in-China.com to protect your funds until delivery. Conduct a Pre-shipment Inspection (PSI) focusing on the Flush Test (using ink or sawdust) and the Vacuum Leak Test to ensure there are no hairline cracks in the ceramic body that could cause leaks after installation.

Wall-mounted urinals are heavy and high-volume. Use FOB (Free On Board) terms to maintain control over sea freight costs. Be aware of Anti-Dumping Duties (ADD) which some regions (like the EU) apply to Chinese ceramic tiles and sanitary ware; verify the specific HS Code (typically 6910.10) with your customs broker to calculate accurate landed costs.